 
|
Metal Grinding Polishing High Speed Carving Tungsten Carbide Burrs YG6/YG8/YG10X
Détails sur le produit:
| Lieu d'origine: | Sichuan, Chine |
| Nom de marque: | Xinsheng |
| Numéro de modèle: | coutume |
Conditions de paiement et expédition:
| Quantité de commande min: | 100 pièces |
|---|---|
| Prix: | $1-$10/Piece |
| Détails d'emballage: | Casse en plastique |
| Conditions de paiement: | L / C, T / T, Western Union |
| Capacité d'approvisionnement: | 250000 pièces / pièces par mois |
|
Détail Infomation |
|||
| Nom: | Fichiers rotatifs en carbure de tungstène | Grade: | Yg6 / yg8 / yg10x |
|---|---|---|---|
| Matériel: | Carbure de tungstène | Taper: | Pièces de machine-outil |
| Ordonnance de procès: | Acceptable pour toute quantité | Échantillon: | Fourni |
| Souligner: | Burrs de sculpture en carbure, Burrs de sculpture à grande vitesse | ||
| Mettre en évidence: | metal tungsten carbide file,metal tungsten carbide burrs,grinding tungsten carbide file |
||
Description de produit
Metal Grinding Polishing High Speed Carving Tungsten Carbide Burrs
Cross cutting
Most widely used shape. Lower cutting resistance than spiral cuts. Chips are powdery. Capable of minimization of chattering.
Spiral cutting
A large cutting depth helps to shorten the required time for cutting. Chips are needle-like. Somewhat higher in cutting resistance than a master cut, but capable of fast cutting. Hence, suitable for high-efficiency cutting processes.
Aluminum cutting
Chip pocket widened to prevent clogging, enhance work performance, and help smooth chip discharge.
Recommendations For Use
• It may be necessary to alter the running speeds from those shown in the speed chart in order to achieve optimum performance.
• Harder materials require slower running speeds.
• Smaller burrs require faster running speeds.
• Long shank burrs require slower speeds for safety reasons.
• Apply constant movement and light pressure when using the burr.
• Running below the optimum speed will cause chipping.
• Running above optimum speed will cause premature tooth wear.
• Allowing the burr to become too hot may cause the braze to soften, and
cause the head to become detached from the shank.
• Using tools and collets which have become worn will encourage chipping.
• Do not sink the burr for more than one third of its periphery
