 |
High Hardness Cone Carbide Burr Die Grinder Bits OEM Service
Dettagli:
| Luogo di origine: | Sichuan, Cina |
| Marca: | Xinsheng |
| Numero di modello: | personalizzato |
Termini di pagamento e spedizione:
| Quantità di ordine minimo: | 100 pezzi |
|---|---|
| Prezzo: | $1-$10/Piece |
| Imballaggi particolari: | Custodia di plastica |
| Termini di pagamento: | L/C, T/T, Western Union |
| Capacità di alimentazione: | 100000 pezzi/pezzi al mese |
|
Informazioni dettagliate |
|||
| Materiale: | Carburo di tungsteno | Campione: | Fornito |
|---|---|---|---|
| Misurare: | 3-25 mm | Tipo di taglio: | Singolo taglio/doppio taglio Diamond Cut |
| Evidenziare: | Burr intagliato in carburo, bara di intaglio ad alta velocità | ||
| Evidenziare: | die grinder bits oem,oem cone carbide burr,25mm die grinder bits |
||
Descrizione di prodotto
High Hardness Cone Carbide Burr Long Shank Die Grinder Bits OEM Service
Size
Tungsten carbide burrs come in a variety of sizes to suit different applications. Choosing the right size will depend on the job at hand. Generally smaller burrs are used on smaller applications for producing finer, smoother work. Larger burrs are for higher, faster stock removal and are more often used on larger jobs.
| Size No. | Burr size | RPM |
| No.42 | 2.4mm | 17,000-26,000 |
| No.43 | 3.0mm | 17,000-26,000 |
| No.1 | 6.0mm | 11,000-16,500 |
| No.5 | 13.0mm | 8,000-12,000 |
| No.6 | 16mm | 7,650-11,500 |
Speed
The rotary tool speed you use will depend on the metal and size/type of burr used. For optimum performance and results it is always best to check the manufacturer recommendations for the correct RPM to use with each metal burr. Ideally you will start off at a lower speed and increase as you go along, however if you find your burr is chipping it is a sign you are going too slow. Here is a general rotary tool speed guide
Technique
For the best results, and to make your burr last longer, make sure you don't use too much pressure while cutting. Too much pressure will cause the cutting edges of the flutes to chip and become smooth prematurely, reducing the life of your burr .
You will also want to ensure you keep the burr moving around the cutting area as much as possible. If the metal burr is left still for too long this can cause clogging and stop it from digging and jabbing into the job, leaving a rough job with visible marks.
