الفئات

إتصال

إتصال:	Mr. Mr.Chen
الهاتف ::	17358926115

نتحدث الآن

100% Raw Tungsten Carbide Rods 2-30mm Diameter 335mm Length

افضل سعر نتحدث الآن

معلومات تفصيلية
اسم:	قضبان كربيد التنجستن	مادة:	100٪ كربيد التنجستن الخام
درجة:	YG10X / YG15 / D10UF / YG8	HRA:	92-92.5
HRC:	45،50،55،60 مطلوب كعملاء	كثافة:	14.2-15.1
قوة الانحناء:	≥ 4000	تسليط الضوء:	معالجة قضيب كربيد التنغستن فارغًا ، قضيب كربيد التنغستن فارغًا ، قضبان كربيد سائل تبريد مركزي
إبراز:	30mm carbide rods,30mm tungsten carbide rod,335mm carbide rods , 30mm tungsten carbide rod , 335mm carbide rods

منتوج وصف

100% Raw Tungsten Carbide Rods

1. WC grain size Range:0.3-2um

2. Diameter Range:2-30mm

3. Length Range:10-335mm

Performance of Different Grade:

RADDE	Density g/cm3	Hardness HRA	T.R.S N/mm2	Performance and recommended USES
JC06F (ZK10UF)	14.9-15.1	≥92.5	≥3600	Suitable for making all kinds of integral cemented carbide tool materials, used for machining chill Cast iron, heat - resistant alloy steel, plastic and carbon fiber
JC10F (ZK30UF)	14.40-14.6	≥92.0	≥3800	An integral cemented carbide tool material with a balanced wear resistance and toughness, used for machining Chilled cast iron, heat-resistant alloy steel, plastic and carbon fiber;It can also be used as Substrate material for coated cutters
JC12F (ZK40UF)	14.2-14.4	≥92.0	≥4000	Integral hard alloy tool material with high wear resistance and toughness, used for Processing a variety of difficult to process materials, such as high-temperature alloy, stainless steel, titanium alloy, High die steel

Grade applications:

Grade	Recommended application
UBT05	Drill, endmill and burr are recommended. Especially suitable for cutting non-ferrous metal and graphite (coating is needed)
UBT10	Ultrafine grain size, with good wear resistant. Higher wear resistant endmill and engraving tools are recommended. Suitable for cutting PCBand plastic
UBT20F	Drill and endmill are recommended. Suitable for cutting general steel (HRC<48), grey cast iron, stainless steel and heat resistant alloy.
UBT20	Drill and endmill are recommended. Suitable for cutting stainless steel, heat resistant alloy and cast iron
UBT25	Ultrafine grain size, high cobalt content with excellent hardness and toughness, endmill and reamer are recommended, especially suitable for cutting steel(HRC:45-55), aluminum alloy and titanium alloy.
UBT30	Suitable for making punching of moulds, tools and anti-vibration boring bar etc.

The normally used dimensions are as below:

بطاقة:

تريد أن تعرف المزيد من التفاصيل حول هذا المنتج