• 100% Raw Tungsten Carbide Rods 2-30mm Diameter 335mm Length
  • 100% Raw Tungsten Carbide Rods 2-30mm Diameter 335mm Length
  • 100% Raw Tungsten Carbide Rods 2-30mm Diameter 335mm Length
  • 100% Raw Tungsten Carbide Rods 2-30mm Diameter 335mm Length
100% Raw Tungsten Carbide Rods 2-30mm Diameter 335mm Length

100% Raw Tungsten Carbide Rods 2-30mm Diameter 335mm Length

Productdetails:

Plaats van herkomst: Sichuan, China
Merknaam: Xinsheng
Modelnummer: Volledig formaat

Betalen & Verzenden Algemene voorwaarden:

Min. bestelaantal: 10 kilogram
Prijs: 50-100USD/ Kilograms
Verpakking Details: Platicdoos & karton
Levertijd: 1-30 dagen
Betalingscondities: L/C, T/T, Western Union
Levering vermogen: 5000 Kilogram/ Maand
Beste prijs Ga Nu Praten.

Gedetailleerde informatie
Naam: De Staven van het wolframcarbide Materiaal: 100% ruw wolframcarbide
Cijfer: YG10X/YG15/D10UF/YG8 HRA: 92-92.5
HRC: 45,50,55,60 vereist als klanten Dikte: 14.2-15.1
Buigsterkte: ≥4000 Bescheiden: Verwerking van wolfraamcarbide-balk, wolfraamcarbide-balk, centrale koelvloeistofgaten
Markeren:

30mm carbide rods

,

30mm tungsten carbide rod

,

335mm carbide rods

Productomschrijving

100% Raw Tungsten Carbide Rods
 
 
1. WC grain size Range:0.3-2um
2. Diameter Range:2-30mm

3. Length Range:10-335mm

 

Performance of Different Grade:
 
RADDE Density g/cm3 Hardness HRA T.R.S N/mm2 Performance and recommended USES
JC06F (ZK10UF) 14.9-15.1 ≥92.5 ≥3600 Suitable for making all kinds of integral cemented carbide tool materials, used for machining chill Cast iron, heat - resistant alloy steel, plastic and carbon fiber
JC10F (ZK30UF) 14.40-14.6 ≥92.0 ≥3800 An integral cemented carbide tool material with a balanced wear resistance and toughness, used for machining Chilled cast iron, heat-resistant alloy steel, plastic and carbon fiber;It can also be used as Substrate material for coated cutters
JC12F (ZK40UF) 14.2-14.4 ≥92.0 ≥4000 Integral hard alloy tool material with high wear resistance and toughness, used for Processing a variety of difficult to process materials, such as high-temperature alloy, stainless steel, titanium alloy, High die steel

Grade applications:

Grade
Recommended application
UBT05
Drill, endmill and burr are recommended. Especially suitable for cutting non-ferrous metal and graphite (coating is needed)
UBT10
Ultrafine grain size, with good wear resistant. Higher wear resistant endmill and engraving tools are recommended. Suitable for
cutting PCBand plastic
UBT20F
Drill and endmill are recommended. Suitable for cutting general steel (HRC<48), grey cast iron, stainless steel and heat resistant alloy.
UBT20
Drill and endmill are recommended. Suitable for cutting stainless steel, heat resistant alloy and cast iron
UBT25
Ultrafine grain size, high cobalt content with excellent hardness and toughness, endmill and reamer are recommended, especially
suitable for cutting steel(HRC:45-55), aluminum alloy and titanium alloy.
UBT30
Suitable for making punching of moulds, tools and anti-vibration boring bar etc.

 

 

The normally used dimensions are as below:

D(mm)
Tolerance(mm)
L(mm)
Tol.of L(mm)
0.3
h6
330
0~+1.5
0.5
h6
330
0~+1.5
0.7
h6
330
0~+1.5
0.9
h6
330
0~+1.5
1.0
h6
330
0~+1.5
1.2
h6
330
0~+1.5
1.4
h6
330
0~+1.5
1.5
h6
330
0~+1.5
1.6
h6
330
0~+1.5
1.7
h6
330
0~+1.5
1.8
h6
330
0~+1.5
1.9
h6
330
0~+1.5
2.0
h6
330
0~+1.5

 

label:

De Staaf van het wolframcarbide

De Staaf van het siliciumcarbide

met een breedte van niet meer dan 15 mm

Wilt u meer details over dit product weten
Ik ben geïnteresseerd 100% Raw Tungsten Carbide Rods 2-30mm Diameter 335mm Length kun je me meer details sturen zoals type, maat, hoeveelheid, materiaal, etc.
Bedankt!
Wachten op je antwoord.